NEC Univerge SV8100 Features And Specifications Manual page 1125

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
L – these are the most commonly assigned programs for this feature.
evel 1
– these are the next most commonly assigned programs for this feature.
Level 2
– these programs are not often assigned and require an expert level working knowledge of
Level 3
the system to be properly assigned.
Program
Program Name
Number
10-12-01 CD-CP00-AU Network Setup – IP
Address
10-12-02 CD-CP00-AU Network Setup –
Subnet Mask
SV8100 Features and Specifications Manual
Description/Comments
Assign the IP Address.
The setting of Subnet Mask is
invalid when all Host Addresses
are 0.
If the network section is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet Mask is
invalid .
Assigned Data
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 192.168.0.10)
128.0.0.0 240.0.0.0
254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
192.0.0.0 248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
224.0.0.0 252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0 (Default)
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
(default = 255.255.0.0)
Issue 1.0
Level
1 2 3
2 - 1101