NEC Univerge SV8100 Features And Specifications Manual page 822

Issue 1.0
Related Features
Attendant Call Queuing
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
20-01-01 System Options – Operator
Access Mode
20-17-01 Operator Extension – Operator's
Extension Number
20-35-01 Extension's Operator Setting
20-36-01 Trunk's Operator Setting
20-37-01 Operator Extension Group Setup
20-38-01 Operator Group Setting
Operation
Refer to the individual features for operation.
2 - 798
Description/Comments
Use this program to set up priority of
a call when calling an operator
telephone (0 = Step, 1 = Circular).
Designate an extension as an
operator. When an extension user
dials 0 or 9 (defined by Program 11-
01, Type 5), calls go to the operator
selected in this program.
If you do not assign an extension in
Program 90-11-01, system alarms
appear on the extension assigned in
this option.
Assign an extension to an operator
group.
Allows the user to select Operator
Group per trunk.
Define the initial operator extension
in the operator group.
Use this program to set up priority of
a call when calling an operator
telephone.
UNIVERGE SV8100
Assigned Data
1
0 = Step
1 = Circular
(default = 0)
Up to eight digits
(default = 101)
(Input: 0~15)
(Input: 0~15)
(0 = Not assigned)
(default = 0)
Up to eight Digits
(default not assigned)
0 = Step
1 = Circular
(default = 0)
Level
2 3
Operator