NEC Univerge SV8100 Features And Specifications Manual page 858

Issue 1.0
Conditions
The hardware/software requirements for the host PC running the PCPro application are:
CPU
Memory
Operating System (OS)
Other
Communication Port
Disk Space
TCP Port
Screen Resolution
The hardware/software requirements for the host PC running WebPro are:
Browser
Network
Screen Resolution
You can have a maximum of four users logged into WebPro anytime.
You can have up to two phones in programming mode anytime.
You can have four WebPro users and two phone programming users logged in all at the
same time for a total of six users in programming mode simultaneously. However, the two
phone programming users do not show up in session management in WebPro.
PCPro can be logged in with only one user. This is allowed only if no other users are logged
into programming mode (PCPro, WebPro, or Phone). Also, if a user is connected to the
switch via PCPro, no other user can log in through PCPro, WebPro, or Phone Programming.
2 - 834
Item
Pentium
Pentium 4 2.5GHz (recommended)
128 MB of RAM, 256 MB (recommended)
MS Windows 2000
Windows XP or Microsoft Vista
Microsoft Internet Explorer 6.0 or higher
LAN, or Modem
35MB for PCPro (minimum)
TCP port 8000 must be open between the terminal and
the host PC for uploading/downloading via LAN. PCPro/
WebPro TCP port is set for 8000 at default, but can be
changed via WebPro using PRG 90-38-02. PRG 90-38-
02 is not accessible from Phone Programming or PCPro.
TCP port 5963 is required to be open if the Debug
Terminal is going to be used.
800 x 600 (minimum)
1024 x 760 (recommended)
Item
MS Internet Explorer 6.0 (or higher)
Mozilla Firefox 1.0.3 (or higher)
IP connection to the KTS
800 x 600 (minimum)
1024 x 760 (recommended)
Requirement
®
III 598MHz (minimum)
Requirement
UNIVERGE SV8100
PC Programming