NEC Univerge SV8100 Features And Specifications Manual page 1182

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
Linux based EliteMail CTI LX
Linux based EliteMail CTI LX Lite
Voice messages forwarded to an e-mail address using e-mail integration are automatically
deleted from the user mailbox E-mail integration does not include client applications
ViewMail
When voice messages are forwarded to an e-mail address using e-mail integration the
following features are not supported: Pager Notification, Message Waiting Indication.
Trunk mapping only works for trunk numbers 1~99. Trunk numbers higher than 99 cannot
be trunk mapped.
The UM8000 Mail can be configured for 4, 8, 12, or 16 ports.
The operating system is Linux.
The UM8000 Mail supports up to four Fax ports.
Extension numbers cannot start with 0 or 9.
The Live Monitor and Live Record features are supported only for External CO/Trunk calls.
Internal/Intercom calls are not supported.
VM8000 InMail and UM8000 Mail cannot be used at the same time in the same system.
Ring Group calls do not follow extension call forwarding to voice mail.
Analog ports on the CPU do not support Message Waiting lamping.
Conversation Record does not work for monitored calls.
Caller ID information is passed from the voice mail to an extension for pre-answer display on
an unscreened transfer from voice mail.
Off-premise notification and external extensions require access to outside lines.
To have the Voice Mail Automated Attendant answer a trunk, program the trunk as a DIL to a
Voice Mail port.
When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the
trunk shows the hold flash rate, however, users cannot pick up these calls (a busy signal is
heard).
The following voice mail features require system tones be changed in Program 80-01-02 to
work. Refer to the Programming section for details.
Call Holding
Call Screening
Busy Greeting
Await Answer Transfer
If the following programs are changed while phone is online, a reset of the phone or reset of
the feature is required before the setting takes effect:
Program 15-02-35 Message Waiting Lamp Cycle for Calling Extension
Program 15-02-36 Message Waiting Lamp Cycle for Called Extension
2 - 1158
®
, VMM, VMG and VML.
UNIVERGE SV8100
UM8000 Mail

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents