NEC Univerge SV8100 Features And Specifications Manual page 651

UNIVERGE SV8100
IP Phone Configuration:
Program
Program Name
Number
15-01-01 Basic Extension Data Setup –
Extension Name
15-05-02 IP Telephone Terminal Basic
Data Setup – IP Phone Fixed Port
Assignment
15-05-07 IP Telephone Terminal Basic
Data Setup – Using IP Address
15-05-15 IP Telephone Terminal Basic
Data Setup – CODEC Type
15-05-16 IP Telephone Terminal Basic
Data Setup – Authentication
Password
15-05-17 IP Telephone Terminal Basic
Data Setup – Calling Party
Display Info
SV8100 Features and Specifications Manual
Description/Comments
Define the extension/virtual
extension name.
MAC Address of registered MLT
SIP phone is stored and/or can
input the MAC address of an MLT
SIP phone so when it comes online
it will be provided with the extension
in which the MAC address matches.
Use this program to review the
registered IP Phones IP Address
[Informational Only].
Use this program to set the
registered IP Phone Codec type –
Reference Program 84-11 Dterm IP
Codec Basic Information.
Assign the authentication password
for SIP single line telephones.
The part of the Invite message the
calling party information is taken
from. There are four choices:
Nickname: Displays the nickname
programmed in 15-05-04.
Display Name: Some SIP phones
have a Field called "Display Name".
If configured, in the SIP phone, this
will display upon a call from that
station.
User Part: Some SIP phones have
a field called "User Part". If
configured in the SIP phone, this
will display upon a call from that
station.
Extension: Display shows
extension of the SIP phone.
Assigned Data
1
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102,
etc.
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
(default =
00-00-00-00-00-00)
0.0.0.0 ~
255.255.255.255
(default = 0.0.0.0)
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
(default = 1)
Up to 24 characters
(default not assigned)
0 = Nickname
1 = Display Name
2 = User Part
3 = Extension
(default = 0)
Issue 1.0
Level
2 3
2 - 627