NEC Univerge SV8100 Features And Specifications Manual page 961

UNIVERGE SV8100
Program
Program Name
Number
20-03-05 System Options for Single Line
Telephones – SLT Operation Mode
20-03-06 System Options for Single Line
Telephones – Headset Ringing
Start Time
20-03-07 System Options for Single Line
Telephones – Trunk Call Dial
Forced Sending Start Time
(Forced Dial)
20-06-01 Class of Service for Extensions
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
20-15-03 Ring Cycle Setup – Incoming
Internal Call
20-15-05 Ring Cycle Setup – DID/DDI
80-03-01 DTMF Tone Receiver Setup –
Detect Level
80-03-02 DTMF Tone Receiver Setup – Start
delay time
SV8100 Features and Specifications Manual
Description/Comments
Used to define the Operation Mode
for SLT terminals.
Define the headset ringing start
time. After this time expires from the
time when a single line telephone is
off-hook, the system sets the single
line telephone to headset ringing
mode.
Used to define the Trunk Call Dial
Forced Sending Start Time.
Assign a unique Class of Service for
Dual OPX telephones only when
using Continued Dialing.
Turns Off (0) or On (1) an extension
user ability to use Continued
Dialing, which allows DTMF signal
sending while talking on extension.
Define the ringing cycle (1~13) for
normal incoming trunk calls (DIL,
ring group, etc.).
Define the ringing cycle (1~13) for
ICM calls.
Define the ringing cycle (1~13) for
DID calls.
Use Items 11~32 to set the criteria
for dial tone detection for outgoing
ARS calls.
Use this option to define the start
delay time for DTMF Tone Receiver.
Assigned Data
0 = Normal Mode
1 = Extended Mode1
2 = Extended Mode2
(default = 0)
0~64800 seconds
(default = 5 seconds)
0~64800 seconds
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 = Class
15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Ringing Cycle = 1~13
(default = 3)
Ringing Cycle = 1~13
(default = 3)
Ringing Cycle = 1~13
(default = 8)
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default: Type 1~5 = 0
0~255
(0.25 ms ~ 64 ms)
default:
Type 1~5 = 0
Issue 1.0
Level
1 2 3
2 - 937