NEC Univerge SV8100 Features And Specifications Manual page 884

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
15-20-01 LCD Line Key Name Assignment
20-06-01 Class of Service for Extensions
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
2 - 860
Description/Comments
Assign the functions of a multiline
terminal Programmable Function
Keys. When using Program 15-07-
01 to program the function keys
17~32 on the D16(LD)-R( ) ADM
start with key 17. Service codes
751 and 752 can also be used to
program these keys.
Used to define the Line Key Name
for line keys on DESILESS
terminals.
Assign Class of Service (1~15) to
extensions.
Turns Off (0) or On (1) the ability
for an extension to program the
Appearance function keys using
Service Code 752.
When programming a feature
as a Programmable Function
Key, refer to Program
15-07-01 in the UNIVERGE
SV8100 Programming
Manual.
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Up to eight digits
Up to 13 characters
Key Number:
01~16 (for 16LD TEL)
17~32 (for 16LD ADM)
Default:
LK01 CO001
: :
LK08 CO006
LK09 All Blank
: :
LK32 All Blank
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for COS
01~15)
Programmable Function Keys
Level
1 2 3