NEC Univerge SV8100 Features And Specifications Manual page 830

Issue 1.0
Program
Program Name
Number
80-03-07 DTMF Tone Receiver Setup – ON
Detect Time
80-03-08 DTMF Tone Receiver Setup –
OFF Detect Time
80-04-04 Call Progress Tone Detector
Setup – No Tone Time
82-11-01 LCA Initial Setup – Bounce
Protect Time
82-11-02 LCA Initial Setup – HookFlash
Start Time
82-11-03 LCA Initial Setup – HookFlash
End Time
Refer to Single Line Telephones on page 2-933
Operation
Normal call handling procedures for single line telephones apply.
2 - 806
Description/Comments
Use this option to define the On
detection time for DTMF Tone
Receiver.
Use this option to define the Off
detection time for DTMF Tone
Receiver.
Use to define the no tone time for
the Call Progress Tone Detector.
Specify a time for detection of a
valid 0ff-Hook indication that is
long enough to prevent an
unintentional bounce of the
receiver from being detected as a
new Off-Hook indication from a
Single Line Telephone.
Specify the minimum hookflash
time from a Single Line Telephone
or analog Voice Mail system before
it is detected as the beginning of a
valid hookflash.
Specify the maximum hookflash
duration from a Single Line
Telephone to receive a second dial
tone.
for related programming.
UNIVERGE SV8100
Assigned Data
1~255
(15+ 15 ms ~ 3825 ms)
default:
All Receivers = 1
1~255
(15+ 15 ms ~ 3825 ms)
default:
All Receivers = 1
0~255 (30+30-7680ms)
default:
Type 1 (DT) – 132
(3990ms)
Type 2 (BT) – 132
(3990ms)
Type 3 (RBT) – 132
(3990ms)
Type 4, Type 5 – 0
0 = No Setting
1~15 = 100ms~1.5sec
(default = 3)
0 = 40ms
1~15 = 90ms~790ms
(default = 5)
0 = HST+0ms 1~15 =
HST+100ms~HST+1500
ms
(HST=Hookflash Start
Time)
(default = 7)
(OPX) Off-Premise Extension
Level
1 2 3