NEC Univerge SV8100 Features And Specifications Manual page 1244

Issue 1.0
Program
Program Name
Number
10-09-01 DTMF and Dial Tone Circuit
Setup
11-07-01 Department Group Pilot Numbers
– Dial
11-12-08 Service Code Setup (for Service
Access) – Barge-In
11-12-52 Service Code Setup (for Service
Access) – Live Monitoring
(In-Mail)
14-01-22 Basic Trunk Data Setup – Caller
ID to Voice Mail
14-02-10 Analog Trunk Data Setup – Caller
ID
15-02-26 Multiline Telephone Basic Data
Setup – MSG Key Operation
Mode
15-02-28 Multiline Telephone Basic Data
setup – Message Waiting Lamp
Color
2 - 1220
Description/Comments
Assign at least one circuit for
DTMF reception (type 0 or 1).
Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one
DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate
one DTMF receiver for every
five devices that use them.
Assign a Department Group pilot
number for the Voice Mail (eight
digits maximum). The extensions
are assigned to the group in
Program 16-02-01.
Use to customize the Service
Codes used for barge-in service.
Define access code used for
In-Mail Live Monitoring (VRS). At
default this program is not set.
Enable (1) or disable (0) the
system ability to send the Caller ID
digits to voice mail.
Enable or Disable a trunk to
receive Caller ID information.
Determine whether an extension
MSG key should function as a
Message key (0) or Voice Mail key
(1) (Default = 0). If set as a
Message key, the user can press
the key to call the voice mail only
when they have new messages. If
set as a Voice Mail key, it functions
as a normal Voice Mail key (it is not
active if Centralized Voice Mail is
used).
Determine whether an extension
Message Waiting Lamp lights
Green (0) or Red (1) when a
message is received.
UNIVERGE SV8100
Assigned Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource 01~08 =
1 (Extensions)
Circuit/Resource 09~32 =
2 (Trunks)
Circuit/Resource 33~96 =
0 (Not Used)
Circuit/Resource 97~160
= 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
Up to eight digits
(default not assigned)
MLT, SLT
(default = 710)
MLT
(default not assigned)
Trunks 1~200
0 = Disable
1 = Enable
(default = 0)
Trunks 1~200
0 = Disable
1 = Enable
(default = 1)
0 = Message Key
1 = Voice Mail Key
(default = 1)
0 = Green
1 = Red
(default = 0)
VM8000 InMail
Level
1 2 3