NEC Univerge SV8100 Features And Specifications Manual page 1245

UNIVERGE SV8100
Program
Program Name
Number
15-03-01 Single Line Telephone Basic Data
Setup – SLT Signaling Type
15-03-03 Single Line Telephone Basic Data
Setup – Terminal Type
15-03-09 Single Line Telephone Basic Data
Setup – Caller ID Function –for
External Module
15-07-01 Programmable Function Keys
16-02-01 Department Group Assignment
for Extensions
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
SV8100 Features and Specifications Manual
Description/Comments
For each UNIVERGE SV8100
voice mail extension, this option
must be set to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always enter
1 (e.g., receive DTMF tones).
This option must be set to 0 when
voice mail is used or the integration
code for the disconnect function is
incorrect.
Assign a Voice Mail key to an
extension. You must enter the
Voice Mail key code (code 77)
followed by:
Your own extension number if
you are setting up your own
Voice Mail key.
A virtual extension number if
you are setting up a Message
Center key for a virtual
extension.
A co-worker's extension
number if you are setting up a
Message Center key for an
installed extension.
An uninstalled extension
number if you are setting up a
Message Center key for an
uninstalled extension.
(Optional) Assign a Voice Mail
Record key to an extension (code
78).
(Optional) Assign a Personal
Answering Machine Emulation key
(code 16).
(Optional) Use a Call Redirect key
(49) to allow a user to transfer a
call to another extension or voice
mail without answering the call.
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Enable (1) disconnect supervision
for the system.
Assigned Data
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Department Groups 1-64
Priority 1-512
Default = All extensions
in Department Group 1
with priority in port order:
Port 1 priority = 1
Port 512 priority = 512
0 = Disable
1 = Enable
(default = 1)
Issue 1.0
Level
1 2 3
2 - 1221