NEC Univerge SV8100 Features And Specifications Manual page 585

UNIVERGE SV8100
Program
Program Name
Number
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-06-01 Class of Service for Extensions
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Operation
To talk Handsfree:
1. Press Speaker, Trunk Line key or Virtual Extension key.
2. Place the call.
3. Speak toward the telephone when the called party answers.
To change a handset call into a Handsfree call:
1. Press Speaker and hang up the handset.
2. Press Speaker again to hang up.
To change a Handsfree call into a handset call:
1. Lift the handset.
To turn on/off Monitor:
1. Press MIC, Feature + 1, or the Microphone Function Key (Program 15-07 or SC 751 : 02) to Turns
On or off the Microphone.
Monitor is off when MIC LED is lit, the Microphone Function Key is lit, or the handset is lifted.
SV8100 Features and Specifications Manual
Description/Comments
Use this option to enable (1) or
disable (0) Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Assign Class of Service (1~15) for
extensions.
Turns Off or On an extension ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
Assigned Data
1
0 = Disable (Voice)
1 = Enable (Signal)
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On
(default = 1 for COS
1~15)
Issue 1.0
Level
2 3
2 - 561