NEC Univerge SV8100 Features And Specifications Manual page 1141

UNIVERGE SV8100
Program
Program Name
Number
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic On-
Hook Transfer
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-10 Class of Service Options
(Supplementary Service) – Barge-
In Monitor
20-13-15 Class of Service Options
(Supplementary Service) – Barge-
In, Initiate
20-13-16 Class of Service Options
(Supplementary Service) – Barge-
In, Receive
20-13-17 Class of Service Options
(Supplementary Service) – Barge-
In Tone/Display (Intrusion Tone)
SV8100 Features and Specifications Manual
Description/Comments
In an extension Class of Service,
turns On (1) or Off (0) the ability to
use Automatic On-Hook Transfer.
If enabled, user must press Hold
and dial the extension number to
Transfer the call. If disabled, a user
must have a Transfer
Programmable Function Key. To
transfer the call, the user would
press Hold, dial the extension
number, then press the Transfer
Programmable Function key to
complete the transfer.
Allow (0) or Deny (1) unanswered
Transferred calls to the COS from
recalling the originating extension.
For example, with this option
set to 1 for COS 1, calls
transferred by any COS to any
extension with a COS of 1, do
not recall.
Turns Off or On an extension to
receive callbacks.
Allows a busy extension the ability
to Manually (0) or Automatically (1)
receive off-hook signals.
Enables the extension Barge-In
Mode to be speech mode (0) or
Monitor mode (1) (i.e., Barge-In
initiator). This is required to transfer
a call into a conference.
Turns Off (0) or On (1) an extension
user ability to barge-in on other's
calls.
In an extension COS, turns On (1)
or Off (0) the ability to receive a
Barge-In on a call.
Turns On (1) or Off (0) the Barge-In
Tone. If disabled, this also turns off
the Barge-In display at the called
extension. As this option is for
extensions and trunks do not have
an option for a Barge-In Tone, the
tone is sent to the trunks based on
the Class of Service of the
transferring extension.
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
1 2 3
2 - 1117