NEC Univerge SV8100 Features And Specifications Manual page 1335

UNIVERGE SV8100
VoIP ToS Setup:
The UNIVERGE SV8100 supports Quality of Service (QoS) Marking for the Session Initiation Protocol
(SIP).
Program
Program Name
Number
84-10-01 ToS Setup – ToS Mode
IP Extension Numbering:
Program
Program Name
Number
11-02-01 Extension Numbering
SIP Extension Codec Information:
Program
Program Name
Number
84-19-01 SIP Extension CODEC
Information Basic Setup – G.711
Audio Frame Number
84-19-02 SIP Extension CODEC
Information Basic Setup – G.711
Voice Activity Detection Mode
84-19-03 SIP Extension CODEC
Information Basic Setup – G.711
Type
84-19-04 SIP Extension CODEC
Information Basic Setup – G.711
Jitter Buffer (min)
SV8100 Features and Specifications Manual
Description/Comments
When Input Data is set to 1, Item No.
07 is invalid. When Data is set to 2,
Item No. 02 ~ 06 are invalid.
Description/Comments
Use this program to define the IP
Phone extension number.
This designated extension is
used to register your IP Phone
and is programmed IP Phone
programming. Refer to the
Installation Instructions for
Installation Instructions for ITH-
term
4D/8D/16D-2/3 D IPK
Terminals and the IP-R( ) (IPK)
Adapters.
Description/Comments
Use this program to define the G.71
audio Frame Size.
Use this program to Enable or
Disable Voice Activity Detection for
G.711.
Use this program to define the G.711
Type – Mu-law is recommended
when in USA.
Use this program to define G.711
Jitter Buffer minimum accepted value
– values are set in ms.
Assigned Data
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
Assigned Data
Up to eight digits
1 101
2 102
3 103
~ ~
99 199
100 3101
~ ~
512 3513
Assigned Data
1~4
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
(default = 2)
0 = Disabled
1 = Enabled
(default = 0)
0 = A-law
1 = u-law
(default = 0)
0~160 ms
(default = 20 ms)
Issue 1.0
Level
1 2 3
Level
1 2 3
Level
1 2 3
2 - 1311