NEC Univerge SV8100 Features And Specifications Manual page 656

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
System Availability
Terminals
All Multiline Terminals
Required Component(s)
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-12-03
CD-CP00-AU Network Setup –
Default Gateway
10-12-05
CD-CP00-AU Network Setup –
NIC Interface
10-12-06
CD-CP00-AU Network Setup –
NAPT Router
2 - 632
Description/Comments
Assign the default gateway IP
address for the CD-CP00-AU.
Use to setup the NIC Interface.
Used to define if using an external
NAT router or not.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
0 = Auto Detect
1 = 100Mbps, Full
Duplex
2 = 100Mbps, Half
Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
(default = 0)
Level
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents