Flexible Timeouts - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
The Flexible Timeouts feature provides a variety of timers in the Resident System Program to allow the
system to operate without initial programming. The system timers can be changed to meet customer
needs according to the system application requirements.
A Timer Class is used to allow terminals and trunks to have different timers for the same feature. There
are 16 timer Classes (0~15). The following table shows the Programs that are used depending on the
Timer Class used:
Timer Timer
Class 0 Class 1~15
20-01-08 20-31-01
20-01-09 20-31-02
20-04-03 20-31-03
21-01-02 20-31-04
21-01-03 20-31-05
21-01-09 20-31-06
22-01-03 20-31-07
22-01-04 20-31-08
SV8100 Features and Specifications Manual
Title
Trunk Queuing Callback
Time
Callback / Trunk Queuing
Cancel Time
CAR/SIE/Virtual Extension
Delay Interval
Intercom Interdigits Time
Trunk Interdigits Time
Hotline Time Start Time
Ring No Answer Alarm
Time
DIL No Answer Recall Time

Flexible Timeouts

Comment
Trunk Queuing callback rings an extension for this
time. Station Timer Class is referred by the station
that sets trunk queuing.
The system cancels an extension Callback or Trunk
Queuing request after this time. Station Timer Class
is referred by the station that sets an extension
Callback or Trunk Queuing.
If CAR/VE is set for Delayed Ringing (Program
15-11-01), ring the covering extension after this
time. Station Timer Class is referred by the station
assigned to CAR/VE.
When placing Intercom calls, users must dial each
digit in this time. Station Timer Class is referred by
stations. Trunk Timer Class is referred by DID/
Automatic Answer Trunk/E&M trunks.
When placing CO calls, users must dial each digit in
this time. Station Timer Class is referred by
stations. Trunk Timer Class is referred by DID/
Automatic Answer Trunk/E&M trunks.
A Ringdown extension automatically calls its
programmed destination after this time. Station
Timer Class is referred by the stations which sets
Hotline.
If a trunk rings a key telephone longer than this time,
the system changes the ring cadence. This indicates
to the user that the call was ringing too long. Trunk
Timer Class is referred by the trunk.
A DIL that rings its programmed destination longer
than this time diverts to the DIL No Answer Ring
Group (Program 22-08-01). Trunk Timer Class is
referred by the trunk.
Issue 1.0
2 - 533