NEC Univerge SV8100 Features And Specifications Manual page 643

UNIVERGE SV8100
Conditions
SIP Stations which support RFC 3842 (Message Waiting) receive Message Waiting Lamp
indications.
SIP Station – PZ-32IPLA, PZ-64IPLA or PZ-128IPLA does not support NAT traversal.
SIP Station – PZ-32IPLA, PZ-64IPLA or PZ-128IPLA does not support a Blind Transfer
feature.
SIP station does not support Video Stream.
SIP Station and SIP Trunk required license key for activation. Once activated, the SIP Client
license may be shared between SIP Station and SIP Trunks.
SIP protocol (RFC3261) is used.
SIP Station uses the PZ-( )ILPA as a media gateway.
Default UDP listen port for a SIP station is 5070. Both port numbers can be configured by
system data.
UNIVERGE SV8100 Station registration policy supports an authentication feature. Enabling
this policy prevents the registered telephone from unexpected override.
UNIVERGE SV8100 supports HOLD and TRF feature on the basis of
draft-ietf-sipping-service-examples-09.txt
draft-ietf-sipping-cc-transfer-05.txt
draft-ietf-sip-session-timer-10.txt
When all VoIP DSP resources are busy, the SIP phone cannot preempt active calls to make
a 000 call.
The UNIVERGE SV8100 CD-CP00-AU is the registration server for the SIP stations. The
configurable IP Address is located in Program 10-12-09 (SV8100 Network Setup – IP
Address).
Default Setting
None
System Availability
Terminals
SIP Terminals Compliant with RFC 3261, RFC 3262, RFC 3264 (Session Description Protocol),
RFC 1889 (Real Time Protocol).
CD-CP00-AU
PZ-32IPLA, PZ-64IPLA or PZ-128IPLA.
SV8100 Features and Specifications Manual
Issue 1.0
draft.
IETF
2 - 619