NEC Univerge SV8100 Features And Specifications Manual page 802

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-10-01 Service Code Setup (for System
Administrator) – Night Mode
Switching
11-10-12 Service Code Setup (for System
Administrator) – Night Mode
Switching for Other Group
11-12-43 Service Code Setup (for Service
Access) – Answer No-Ring Line
(Universal Answer)
11-12-50 Service Code Setup (for Service
Access) – General Purpose
Relay
12-01-01 Night Mode Function Setup –
Manual Night Mode Switching
12-01-02 Night Mode Function Setup –
Automatic Night Mode Switching
12-02-01 Automatic Night Service – Start
Time
12-02-02 Automatic Night Service – End
Time
12-02-03 Automatic Night Service –
Operation Mode
2 - 778
Description/Comments
Customize the service code (718)
to be used for day/night mode
switching.
Customize the service code (618)
to be used for Day/Night mode
switching for another Night service
group.
Customize the service code (
be used to manually answer a
Universal Night Answer.
Define the service code to be used
for turning the general purpose
relay on and off.
Turns Off (0) or On (1) any
extensions from activating Manual
Night Service.
According to a preset schedule,
enable (1) or disable (0) Automatic
Night Service for the system. Make
sure to set the Service Patterns in
Program 12-02-01, Program 12-02-
02 and Program 12-02-03.
For each Night Service Group,
enter up to 20 start times for each
Time Pattern (1~10).
The first pattern start time (Pattern
1) should begin at 00:00 (midnight).
For each Night Service Group
(01~32), enter up to 20 end times
(0000~2359) for each Time Pattern
(1~10).
For each Night Service Group
(01~32), define the Night Service
Mode (1~8) for up to 20 start/end
times for each Time Pattern (1~10).
UNIVERGE SV8100
Assigned Data
MLT,SLT
(default = 718)
MLT
(default = 618)
#
9) to MLT, SLT
#
(default = 9)
MLT, SLT
(default = 780)
0 = Off
1 = On
(default = 1)
0 = Off
1 = On
(default = 0)
0000~2359
Please refer to the
SV8100 Programming
manual for default
settings.
0000~2359
Please refer to the
SV8100 Programming
manual for default
settings.
1~8
Please refer to the
SV8100 Programming
manual for default
settings.
Level
1 2 3
Night Service