NEC Univerge SV8100 Features And Specifications Manual page 1270

Issue 1.0
Program
Program Name
Number
41-19-06 ACD Voice Mail Delay
Announcement – Wait Tone Type
at Message Interval.
41-19-07 ACD Voice Mail Delay
Announcement – ACD Forced
Disconnect Time after 2nd
Announcement.
41-19-08 ACD Voice Mail Delay
Announcement – Delayed
Message Interval Time
47-03-01 SV8000 In-Mail Group Mailbox
Options – Master Mailbox Active
47-03-02 SV8000 In-Mail Group Mailbox
Options – Master Mailbox Number
47-03-03 SV8000 In-Mail Group Mailbox
Options – Master Mailbox Type
2 - 1246
Description/Comments
Determines what the caller hears
between the messages.
Assign how long the system waits
after the end of the ACD delay
message before disconnecting.
Set the time between the Delayed
Messages.
Use this option to Enable or Disable
the Master Mailbox. A Master
Mailbox is not accessible when it is
disabled.
The Master Mailbox Number is the
same as the Department Group
master (pilot) number. Use this
option to select the Department
Group master (pilot) number
associated with the Master Mailbox
you are programming.
Use this option to set the Master
Mailbox type. There are two types
of VM8000 InMail mailboxes:
Subscriber (1), and Routing (2).
UNIVERGE SV8100
Assigned Data
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music
Source
(default = 0)
0 ~ 64800 (seconds)
(default = 0)
0 ~ 64800 (seconds)
(default = 20)
0 = Disable
1 = Enable
(default = 0)
Digits (eight maximum,
using 0~9)
No Setting (entered by
pressing Hold)
(default not assigned)
0 = None
1 = Subscriber
2 = Routing
(default = 1)
VM8000 InMail
Level
1 2 3