NEC Univerge SV8100 Features And Specifications Manual page 1339

UNIVERGE SV8100
Program
Program Name
Number
84-26-03 IPL Basic Setup – RTCP Port
Number (RTP Port Number + 1)
IP Phone Configuration:
Program
Program Name
Number
15-01-01 Basic Extension Data Setup –
Extension Name
15-05-02 IP Telephone Terminal Basic Data
Setup – IP Phone Fixed Port
Assignment
15-05-07 IP Telephone Terminal Basic Data
Setup – Using IP Address
15-05-15 IP Telephone Terminal Basic Data
Setup – CODEC Type
15-05-16 IP Telephone Terminal Basic Data
Setup – Authentication Password
SV8100 Features and Specifications Manual
Description/Comments
Use to set the IP address of IPL and
the port.
Description/Comments
Define the extension/virtual extension
name.
MAC Address of registered MLT SIP
phone is stored and/or can input the
MAC address of an MLT SIP phone
so when it comes online it will be
provided with the extension in which
the MAC address matches.
Use this program to review the
registered IP Phones IP Address
[Informational Only].
Use this program to set the registered
IP Phone Codec type – Reference
Program 84-11 Dterm IP Codec
Basic Information.
Assign the authentication password
for SIP single line telephones.
Assigned Data
0~65534
Defaults:
VoIP GW1 = 10021
VoIP GW2 = 10053
VoIP GW3 = 10085
VoIP GW4 = 10117
VoIP GW5 = 10149
VoIP GW6 = 10181
VoIP GW7 = 10213
VoIP GW8 = 10245
Assigned Data
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102, etc.
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
(default =
00-00-00-00-00-00)
0.0.0.0 ~
255.255.255.255
(default = 0.0.0.0)
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
(default = 1)
Up to 24 characters
(default not assigned)
Issue 1.0
Level
1 2 3
Level
1 2 3
2 - 1315