NEC Univerge SV8100 Features And Specifications Manual page 1251

UNIVERGE SV8100
Program
Program Name
Number
47-01-02 VM8000 InMail System Options –
VM8000 InMail Master Name
47-01-03 VM8000 InMail System Options –
Subscriber Message Length
47-01-04 VM8000 InMail System Options –
Non-Subscriber Message Length
SV8100 Features and Specifications Manual
Description/Comments
The SV8100 system must be reset
for a change to this program to take
effect. Use this option to modify the
name for all VM8000 InMail ports.
The system briefly displays this
name when a display multiline
terminal user calls a Voice Mail port
(either by pressing Message, their
voice mail key, or by dialing the
master number). You should always
end the name with the ##
characters. The system substitutes
the port number for the last #. Using
the default name In-Mail ##, for
example, the telephone display
shows VM8000 InMail #1 when
calling port 1.
Use this option to set the maximum
length of recorded messages for:
Subscriber Mailbox users dialing
RS to record and send a
message.
Extension users leaving a
message in a Subscriber
Mailbox.
Outside Automated Attendant
callers accessing a mailbox via a
GOTO command and then
dialing RS to record and send a
message.
Subscriber Mailbox Greetings.
Announcement Messages.
Call Routing Mailbox Instruction
Menus.
The length of a Conversation
Record is 10 times the
Subscriber Message Length.
Since the Conversation Record
time cannot exceed 4095
seconds, any setting in
Subscriber Message Length
larger than 409 has no effect
on the length of recorded
conversations.
Use this option to set the maximum
length of recorded messages for:
Automated Attendant callers
leaving a message or Quick
Message in a Subscriber
Mailbox.
Outside callers transferred by an
extension user to a Subscriber
Mailbox.
Assigned Data
Up to 12 characters
Default:
##
In-Mail
(The system substitutes
#
the port number for the
when calling the port).
1~4095 (seconds)
(default = 120)
1~4095 (seconds)
(default = 120)
Issue 1.0
Level
1 2 3
2 - 1227