NEC Univerge SV8100 Features And Specifications Manual page 1373

UNIVERGE SV8100
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
Use this key...
Code: 27
Operation: Press
key + bin + Line or
Speaker key
Code: 28
Operation: Press
key + bin + Line or
Speaker key
Code: 29
Operation: Place
call + Press key
Code: 30
Operation:
Save: Place call +
Press key
Redial: Line or
Speaker key + Press
key
Code: 31
Operation:
Store: While on call,
Press key + number
to store
Use: Press key +
Speaker key or line
Erase: Speaker key
+ Press key
Code: 33
Operation: Call ext.
and receive busy +
Press key
Code: 34
Operation: Call ext
+ Press key
Code: 35
Operation: Call
busy extension or
access busy trunk +
Press key
Code: 36
Operation: Dial
busy ext + Press key
Codes Tables
press the key and enter the code (e.g., 48 for Voice Over).
For this feature...
Speed Dialing
Repeat Redial
Save Number Dialed
Memo Dial
Off-Hook Signaling
Barge-In
Callback / Camp-On /
Trunk Queuing
Department Step
Calling
When you are...
Dialing a stored System
Speed Dialing number
Dialing a stored Group
Speed Dialing number
Activating repeat redial
while on a call
Saving, redialing or
checking a saved number
Storing, using or checking
a Memo Dial number
Signaling a busy
extension
Barging In on a co-
worker's conversation
Leaving a Callback
request at a busy
extension, Camping On to
a busy extension, Queuing
for a busy trunk
Step Calling through a
Department Group for an
idle member
Issue 1.0
Also see
Key Lamp Status
Srvc Code
None #2 + bin
None #4 + bin
Fast Flash while
system waits to
redial
None
None
None
None
On red when
activated
None
-
715
-
709
710
750
708
3 - 33