NEC Univerge SV8100 Features And Specifications Manual page 1320

Issue 1.0
Program
Program Name
Number
40-10-04 Voice Announcement Service
Option – VRS No Answer Time
40-10-05 Voice Announcement Service
Option – Park and Page Repeat
Timer (VRS Msg Resend)
40-10-06 Voice Announcement Service
Option – Set VRS Message for
Private Call Refuse (VRS Msg
Private Call)
40-10-07 Voice Announcement Service
Option – Set VRS Message for
Caller ID Refuse (VRS Msg CID)
40-11-01 Preamble Message Assignment
47-03-02 SV8000 In-Mail Group Mailbox
Options – Master Mailbox Number
Operation
VRS Messages
To record a VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 616.
3. Dial 7 (Record).
2 - 1296
Description/Comments
If an extension has Personal
Greeting enabled and all VRS ports
are busy, a DIL or DISA call to the
extension waits this time for a VRS
port to become free.
If a Park and Page is not picked up
during this time, the Paging
announcement repeats.
This item assigns the VRS
Message number to be used as
Private Call Refuse. When Fixed
message is set, VRS message
guidance is: Service finished.
Disconnect the line, please.
This item assigns the VRS
Message number to be used as
Caller ID Refuse. When Fixed
Message is set, VRS message
guidance is: Service finished.
Disconnect the line, please.
For each trunk that should have the
900 Preamble option, enter the
number of the VRS message
(1~48) that is your recorded
preamble message. Enter 0 for no
preamble.
The Master Mailbox Number is the
same as the Department Group
master (pilot) number. Use this
option to select the Department
Group master (pilot) number
associated with the Master Mailbox
you are programming. Digits (7
maximum, using 0~9).
UNIVERGE SV8100
Assigned Data
0~64800 seconds
(default = 0)
0~64800 seconds
(default = 0)
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
0~100
(0 = No Service)
(default = 0)
Digits (eight maximum,
using 0~9)
No Setting
(entered by pressing
Hold)
(default not assigned)
Voice Response System (VRS)
Level
1 2 3