NEC Univerge SV8100 Features And Specifications Manual page 1220

Issue 1.0
Program
Program Name
Number
11-07-01 Department Group Pilot Numbers
– Dial
15-03-01 Single Line Telephone Basic Data
Setup – SLT Signaling Type
15-03-03 Single Line Telephone Basic Data
Setup – Terminal Type
16-01-01 Department Group Basic Data
Setup – Department Name
16-01-02 Department Group Basic Data
Setup – Department Calling Cycle
16-01-03 Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
16-01-04 Department Group Basic Data
Setup – Hunting Mode
16-01-05 Department Group Basic Data
Setup – Extension Group All Ring
Mode Operation
16-01-06 Department Group Basic Data
Setup – STG Withdraw Mode
2 - 1196
Description/Comments
Assign a Department Group pilot
number for the CNF(8)-U ETU
(eight digits max). The extensions
are assigned to the group in
Program 16-02-01.
For each SLT extension, this option
must be set to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always enter
1 (e.g., receive DTMF tones).
Assign a name to the Extension
(Department) Groups.
Set the routing cycle for calls into a
department (i.e., when a user dials
the department pilot number). The
system can ring the highest priority
extension available (Priority
Routing, 0) or cycle in circular order
to a new idle extension for each
new call (Circular Routing, 1).
Set how the system routes an
Intercom call to a busy Department
Group member. The caller can
hear busy tone (0) or overflow to
the first available Department
Group member (1). This option is
for Intercom calls to an extension,
not a pilot number.
Set if an unanswered call should
hunt once stopping at the last
member tried (0) or continually hunt
through the idle members (1).
Set if all members of the group
should ring automatically (1) or
through the use of the service code
(0) defined in Program 11-12-09.
Selecting automatic will override
the settings of Programs 16-01-03
and 16-01-04.
Use to set the STG withdraw mode
for each department group.
UNIVERGE Multimedia Conference Bridge
UNIVERGE SV8100
Assigned Data
Up to eight digits
(default not assigned)
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)
Maximum 12 characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
(default = 0)
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
0 = Last extension is
called and hunting is
stopped
1 = Circular
(default = 0)
0 = Manual
1 = Automatic
(default = 0)
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
Level
1 2 3