NEC Univerge SV8100 Features And Specifications Manual page 954

Issue 1.0
Related Features
Programmable Function Keys
Transfer
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
15-02-05 Multiline Telephone Basic Data
Setup – Transfer Key Operation
Mode
15-07-01 Programmable Function Keys
2 - 930
Description/Comments
Use this option to set the operating
mode of the extension Transfer key.
The keys can be for Call Transfer,
Serial Calling or Flash. When
selecting the Flash option
(selection 2), refer also to Program
81-01-14.
Assign a programmable key as a
Serial Call key (code 43).
UNIVERGE SV8100
Assigned Data
0 = Transfer
1 = Call back
2 = Hook
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Level
1 2 3
Serial Call