NEC Univerge SV8100 Features And Specifications Manual page 1085

UNIVERGE SV8100
Program
Program Name
Number
20-14-02 Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group Access
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dialing
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
20-14-07 Class of Service Options for
DISA/E&M – External Paging
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
20-14-09 Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
20-14-10 Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
20-14-12 Class of Service Options for
DISA/E&M – Retrieve Park Hold
90-48-01 Button Kit Information of
Multiline Telephone
SV8100 Features and Specifications Manual
Description/Comments
This option Enables or Disables a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
This option Enables or Disables a
DISA or tie trunk caller's ability to
access trunk groups for outside calls
(Service Code 704).
This option Enables or Disables a
DISA or tie trunk caller's ability to
use the System Speed Dialing.
This option Enables or Disables a
DISA or tie trunk caller's ability to
dial 0 for the telephone system
operator.
This option Enables or Disables a
DISA or tie trunk caller's ability to
use the telephone system Internal
Paging.
This option Enables or Disables a
DISA or tie trunk caller's ability to
use the telephone system External
Paging.
This option Enables or Disables a
DISA or tie trunk caller's ability to
use Direct Trunk Access (Service
Code 715).
This option Enables or Disables a tie
trunk caller's ability to use Forced
Trunk Disconnect (Service Code
26). This option is not available to
DISA callers.
Enable or Disable a DISA callers
ability to use the Call Forward
service codes (Program 11-11-01
through Program 11-11-05).
In an extension Class of Service,
enable (1) or disable (0) a DISA or
tie trunk user from using the Barge-
In feature.
Turns Off or On the ability for a DISA
caller to retrieve parked or held
calls.
Used to set the button kit
information on a new telephone on
the SV8100 system.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = No Setting
1 = Not Used
2 = Type A with Cursor
Key
3~9 = Not Used
10 = Type A without
Cursor Key (Retrofit)
(default not assigned)
Issue 1.0
Level
2 3
2 - 1061