NEC Univerge SV8100 Features And Specifications Manual page 1113

UNIVERGE SV8100
Program
Program Name
Number
24-02-10 System Options for Transfer –
Disconnect Trunk-to-Trunk
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning Tone
Time
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
Method C – Tandem Trunking on Hang up
Program
Program Name
Number
14-01-04 Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
14-01-05 Basic Trunk Data Setup – Receive
Gain Level for Conference and
Transfer Calls
14-01-13 Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
20-06-01 Class of Service for Extensions
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic On-
Hook Transfer
SV8100 Features and Specifications Manual
Description/Comments
This timer starts after the
Trunk-to-Trunk warning tone is
heard.
Determine the time a DISA caller or
any trunk-to-trunk (such as Tandem
Trunking) conversation can talk
before the Long Conversation tone
is heard.
Determine the time the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
Description/Comments
Select the Transmit CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
Select the Receive CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
For each trunk, enter 1 to enable
loop supervision.
Assign a Class of Service (1~15) to
an extension.
Turns Off (0) or On (1) an extension
to use Forced Trunk Disconnect.
This allows the extension to
disconnect an Unsupervised
Conference in progress.
Turns Off (0) or On (1) the Trunk-to-
Trunk Transfer Restriction. If
enabled, Trunk-to-Trunk Transfer is
not possible.
Assigned Data
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 1800
seconds)
0~64800 (seconds)
(default = 30 seconds)
Assigned Data
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 1.0
Level
1 2 3
Level
1 2 3
2 - 1089