NEC Univerge SV8100 Features And Specifications Manual page 813

UNIVERGE SV8100
Program
Program Name
Number
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-34 Class of Service Options
(Supplementary Service) – Block
Manual Off-Hook Signaling
20-18-06 Service Tone Timers – Interval of
Call Waiting Tone
80-01-01 Service Tone Setup – Repeat
(39) Count
80-01-02 Service Tone Setup – Basic Tone
(39) Number
Operation
To send Off-Hook signals to an extension busy on a call:
Your extension may send off-hook signals automatically.
1. Dial 7.
- OR -
Press Off-Hook Signaling key (Program 15-07 or SC 751: 33).
You hear ringback.
To have your call voice-announce, dial 1.
Receiving Off-Hook Signaling on a single line telephone while engaged on an internal or external
call:
1. When Off-Hook Signaling is heard in the receiver, press the Flash Key to answer the call. The first
call is placed on hold.
2. Press the Flash Key again to toggle between the two calls.
If the single line phone hangs up with the active call, the other call on hold rings back to the single line.
SV8100 Features and Specifications Manual
Description/Comments
Allows a busy extension ability to
automatically (1) or manually (0)
receive Off-Hook Signals.
Turns Off (0) or On (1) an extension
ability to block off-hook signals
manually sent from a co-worker.
Use this timer to set the time
between Off-Hook Signaling alerts.
Customize the system basic tones
and system service tones. You
need to reset for the changes to
take affect.
The following features require that
the system tones listed below be
changed to match the table. After
changing these settings the chassis
must be reset for the changes to
take effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
0~255 (default 0 = until
On-Hook)
Refer to Table 2-14
Service Tone Setup,
Program 80-01-01 on
page 2-555
Refer to Table 2-15
Service Tone Setup,
Program 80-01-02 on
page 2-558
Issue 1.0
Level
1 2 3
2 - 789