NEC Univerge SV8100 Features And Specifications Manual page 1095

UNIVERGE SV8100
Program
Program Name
Number
10-03-02 ETU Setup (DTI (T1) PKG Setup)
– T1 Signal Format Selection
10-03-03 ETU Setup (DTI (T1) PKG Setup)
– Zero Code Suppression
10-03-04 ETU Setup (DTI (T1) PKG Setup)
– Line Length Selection
10-03-05 ETU Setup (DTI (T1) PKG Setup)
– T1 Clock Source
10-03-06 ETU Setup (DTI (T1) PKG Setup)
– Number of Ports
10-09-01 DTMF and Dial Tone Circuit
Setup
10-39-01 Fractional Setup – Fractional
14-01-02 Basic Trunk Data Setup –
Transmit Level
14-01-03 Basic Trunk Data Setup –
Receive Level
SV8100 Features and Specifications Manual
Description/Comments
Used to setup and confirm the
basic configuration data for logical
port number T1.
Used to setup and confirm the
basic configuration data for the
Clear Channel Selection.
Used to setup and confirm the
basic configuration data for the
Line Length Selection.
Used to setup and confirm the
basic configuration data for the DTI
trunk type assignment.
Used to setup and confirm the
basic configuration data for the
number of ports required.
For ANI/DNIS, reserve at least one
DTMF receiver for DTMF reception
(entry 0 or 2).
Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one
DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate one
DTMF receiver for every five
devices that use them.
Use to enable (1) or disable (0) T1/
PRI fractional function.
Use to select transmit level of
CODEC Gain (signal amplification)
for each trunk.
Use to select receive level of
CODEC Gain (signal amplification)
for each trunk.
Assigned Data
0 = D4 (12 Multi Frame)
1 = ESF (24 Multi Frame)
(default = 1)
0 = B8ZS
1 = AMI/ZCS
(default = 0)
0 = 0 feet ~ 133 feet
1 = 133 feet ~ 266 feet
2 = 266 feet ~ 399 feet
3 = 399 feet ~ 533 feet
4 = 533 feet ~ 655 feet
(default = 0)
0 = Internal
1 = External
(default = 1)
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
(default = 0)
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource 01~08 =
1 (Extensions)
Circuit/Resource 09~32 =
2 (Trunks)
Circuit/Resource 33~96 =
0 (Not Used)
Circuit/Resource 97~160
= 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
0 = Disable
1 = Enable
(default = 0)
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
Issue 1.0
Level
1 2 3
2 - 1071