NEC Univerge SV8100 Features And Specifications Manual page 780

Issue 1.0
Program
Program Name
Number
34-06-02 Add/Delete Digit for E&M Tie
Line – Additional Dial Digits
34-07-01 E&M Tie Line Timer – First Digit
Pause (E&M Immediate Start)
34-07-02 E&M Tie Line Timer – First Digit
Pause (E&M Wink Start)
34-07-03 E&M Tie Line Timer – First Digit
Pause (LD Trunk)
34-07-04 E&M Tie Line Timer – LD Trunk
Guard Time
34-07-05 E&M Tie Line Timer – Trunk
Answer Detect Timer for E&M
34-08-01 Toll Restriction Data for E&M Tie
Lines
80-03-01 DTMF Tone Receiver Setup –
Detect Level
80-03-02 DTMF Tone Receiver Setup –
Start Delay Time
2 - 756
Description/Comments
If a Tie Line network requires
additional digits to reroute the call
to a location, enter the digits for
the location which should be
added to the received digits.
Used to define the First Digit
Pause (E&M Immediate Start)
timer.
Used to define the First Digit
Pause (E&M Wink Start) timer.
Used to define the First Digit
Pause (LD Trunk) timer.
Used to define the LD Trunk
Guard Time.
Used to define the Trunk Answer
Detect Timer for E&M timer.
Define the toll restriction data for
E&M Tie Lines if required. This
should be defined if toll restriction
is enabled in Program 21-05-13.
Use Items 11~32 to set the criteria
for dial tone detection for outgoing
ARS calls.
Use this option to define the start
delay time for DTMF Tone
Receiver.
UNIVERGE SV8100
Assigned Data
Up to four digits
#
0~9, ,
(default not assigned)
0~64800
(default = 3)
0~64800
(default = 0)
0~64800
(default = 3)
0~64800
(default = 0)
0~64800
(default = 30)
Up to 10 digits
#
(0~9, , )
(default not assigned)
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default: Type 1~5 = 0
0~255
(0.25 ms ~ 64 ms)
default: Type 1~5 = 0
Multiple Trunk Types
Level
1 2 3