NEC Univerge SV8100 Features And Specifications Manual page 1340

Issue 1.0
Program
Program Name
Number
15-05-17 IP Telephone Terminal Basic Data
Setup – Calling Party Display Info
15-05-18 IP Telephone Terminal Basic Data
Setup – IP Duplication Allowed
Group
Operation
Placing an outside call with pre-dial:
1. Dial 9.
2. Press and hold the
3. Dial the outside number.
4. Press the Green Phone key (On-Hook/Off-Hook).
For more information on the Wireless DECT (SIP) feature, refer to the NEC SIP DECT Solutions Manuals.
2 - 1316
The part of the Invite message the
calling party information is taken
from. There are four choices:
Nickname: Displays the nickname
programmed in 15-05-04.
Display Name: Some SIP phones
have a Field called "Display Name". If
configured, in the SIP phone, this will
display upon a call from that station.
User Part: Some SIP phones have a
field called "User Part". If configured
in the SIP phone, this will display
upon a call from that station.
Extension: Display shows extension
of the SIP phone.
If there is an adapter that has one IP
address coming into it but has
multiple extensions off of it. Assign
all the extensions to a group so that
way the CPU knows that the one IP
address is assigned to multiple
extensions.
key to insert a pause (–), if necessary.
#
Description/Comments
UNIVERGE SV8100
Assigned Data
0 = Nickname
1 = Display Name
2 = User Part
3 = Extension
(default = 0)
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5
6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
Wireless DECT (SIP)
Level
1 2 3