NEC Univerge SV8100 Features And Specifications Manual page 913

UNIVERGE SV8100
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
22-06-01 Normal Incoming Ring Mode
22-08-01 DIL/IRG No Answer Destination
22-12-01 DID Intercept Ring Group
SV8100 Features and Specifications Manual
Description/Comments
Assign the incoming trunk type (0)
for each trunk. There is one item for
each Night Service Mode.
This option must be set to 0
for Ring Groups to work.
Assign extensions to ring groups.
Assign trunks to ring groups.
Define whether or not an extension
should ring for the Normal Incoming
Ring Mode.
For DIL Delayed Ringing, assign
the DIL No Answer Ring Group. An
unanswered DIL rings this group
after the DIL No Answer Time
(Program 22-01-04) expires. DIL
Delayed Ringing can also reroute
outside calls ringing a Ring Group
In-Skin/External Voice Mail, or
Centralized Voice Mail.
For each DID Translation Table,
assign the destination for DID
Intercept. The destination can be a
Ring Group, In-Skin/External Voice
Mail, or Centralized Voice Mail. For
each table, make a separate entry
for each Night Service mode.
Assigned Data
Day/Night Mode: 1~8
0 = Normal
1 = VRS (second dial tone
if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108 (first
eight ports) ring for
incoming Ring Group 1
calls. No other extensions
ring for incoming Ring
Group 1 calls.
Incoming Group Number
for Day/Night Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
0 = No Ring
1 = Ring
(default = 1)
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
0 (No Setting)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
(default = 1)
Issue 1.0
Level
1 2 3
2 - 889