NEC Univerge SV8100 Features And Specifications Manual page 1118

Issue 1.0
Program
Program Name
Number
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning Tone
Time
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
80-01-02 Service Tone Setup – Basic Tone
(35) Number
Operation
Method A – Tandem Trunking from Conference
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press Conf.
3. Place or answer second trunk call.
4. To set up the tandem call, press Conf twice.
This sets up a Conference between you and both outside parties.
5. Press Transfer.
- OR -
Press Hold and dial
Program 11-12-57.
The line keys for the trunks blink green as long as the Unsupervised Conference continues.
2 - 1094
Description/Comments
Determine the time a DISA caller
can talk before the Long
Conversation tone is heard
(0~64800 seconds). If Program 25-
07-08 is set to 0, the call is
disconnected after the timer
expires. This timer is set again
when the external digit timer
expires.
If this option is set to 0, the
settings in PRG 24-02-07 and
PRG 24-07-10 are followed –
not PRG 25-07-07 and PRG
25-07-08.
This timer determines how long the
system waits (0~64800 seconds)
before disconnecting a DISA call
after the Long Conversation tone is
heard. This program has no affect if
Program 25-07-07 is set to 0.
Used to Edit the warning service
tone within the system.
8 or the service code set for Unsupervised Conference/Tandem Trunking in
#
Assigned Data
0~64800 (seconds)
(default = 1800
seconds)
0~64800 (seconds)
(default = 30 seconds)
1~33
0 = No Tone
33 = Default Time Slot
Please refer to the
VS8100 Programming
manual for defaults
Tandem Trunking (Unsupervised Conference)
UNIVERGE SV8100
Level
1 2 3