NEC Univerge SV8100 Features And Specifications Manual page 1060

Issue 1.0
Program
Program Name
Number
51-11-01 Net-Link System Information –
System Name
51-11-02 Net-Link System Information –
Connected State
51-11-03 Net-Link System Information – IP
Address
51-11-04 Net-Link System Information –
MAC Address
51-11-05 Net-Link System Information –
Primary Priority Level
51-11-06 Net-Link System Information –
Main Software Version
51-12-01 Primary System Information –
System ID
51-12-02 Primary System Information –
System Name
51-12-03 Primary System Information – IP
Address
51-12-04 Primary System Information –
MAC Address
51-12-05 Primary System Information –
Primary Priority Level
51-12-06 Primary System Information –
Main Software Version
51-13-01 Net-Link Options– Automatic IP
Address List Operation Update
51-13-02 Net-Link Options– Time Zone
Option
51-13-03 Net-Link Options– MAC Address
Authorization Enable
51-14-01 Net-Link System Control – Delete
System Information
2 - 1036
Description/Comments
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
When set to 1 (On), the list in
Program 51-03-01 is automatically
updated.
When set to 0, the following features
are affected: Clock Display,
Incoming/Outgoing History List.
When set to 1, the following features
are affected: VRS Time Announce,
Date and Time Setting Service
Code, Alarm Clock setting.
Refers to Program 51-02-04 for
setting MAC address.
This command is used to delete
system information and the slot
information. The system must be
disconnected.
UNIVERGE SV8100
Assigned Data
(default not assigned)
(default = 0)
(default =
000.000.000.000)
(default =
00:00:00:00:00:00)
(default = 0)
(default = XX.XX)
(default = 0)
(default not assigned)
(default =
000.000.000.000)
(default =
00:00:00:00:00:00)
(default = 0)
(default = XX.XX)
0 = Disable (Off)
1 = Enable (On)
(default = 1)
0 = Off
1 = On
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
1~50
(default = 1)
SV8100 NetLink
Level
1 2 3