NEC Univerge SV8100 Features And Specifications Manual page 1094

Issue 1.0
Related Features
Caller ID
Central Office Calls, Answering
Central Office Calls, Placing
Code Restriction
Dial Tone Detection
Direct Inward Dialing (DID)
ISDN Compatibility
Station Message Detail Recording
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup (DTI (T1) PKG Setup)
– Logical Port Number
2 - 1070
Description/Comments
Set various T1 trunk options for
compatibility with the local Telco.
For ANI/DNIS, the following
settings in Program 10-03 are
recommended:
Item 02: Frame Type = 0 (D4)
Item 03: Zero Suppression = 1
(AMI/ZCS)
Item 04: Distance Between ETU
and CSU = 0 (0~133')
Item 05: Clock Select = 1 (Internal)
Item 06: DTI No. of Ports= 0 (Auto/
24), 1 (4 Ports), 2 (8 Ports), 3 (12
ports), 4 (16 ports), and 5 (20
Ports)
T1 Trunking (with ANI/DNIS Compatibility)
UNIVERGE SV8100
Assigned Data
The start port number of
a T1 line is displayed,
and 24 logic ports are
automatically assigned to
a DTI (T1) line.
0~200
(default = 0)
Level
1 2 3