NEC Univerge SV8100 Features And Specifications Manual page 1000

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
16-01-03
Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
20-06-01
Class of Service for Extensions
20-09-07
Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-06
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Operation
To make a Step Call:
1.
Place a call to a busy extension.
2 - 976
Description/Comments
Assign if a call to busy station hunts
(1) or not hunts (0) to the next
available member of the Hunt Group
(Department Group).
Refer
Department Calling on
page 2-343
to set up the
Department Group.
Assign a Class of Service (1~15) to
an extension.
In an extension Class of Service,
turns On (1) or Off (0) Call Queuing to
the extension. This must be set to (0)
for Station Hunting to work.
In an extension Class of Service,
allows a busy extension to Manually
(0) or Automatically (1) receive off-
hook signals. This must be set to (0)
for Station Hunting to work.
UNIVERGE SV8100
Assigned Data
1
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Station Hunt
Level
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents