NEC Univerge SV8100 Features And Specifications Manual page 1071

UNIVERGE SV8100
Program
Program Name
Number
10-03-06 ETU Setup (DLC PKG Setup) –
Terminal Type (B2)
10-03-07 ETU Setup (DLC PKG Setup) –
Logical Port Number (B2)
13-07-01 Telephone Book Dial Number and
Name – Speed Dialing Data
13-07-02 Telephone Book Dial Number and
Name – Name
13-07-04 Telephone Book Dial Number and
Name – Group Number
13-08-01 Telephone Book System Name –
Telephone Book Name
13-09-01 Telephone Book Group Name –
Group Name
13-10-01 Telephone Book Routing –
Outgoing Mode
SV8100 Features and Specifications Manual
Description/Comments
Use to setup and confirm the Basic
Configuration data for terminal type.
Use to setup and confirm the Basic
Configuration data for logical port
number (B2).
Used to set up the group name of
the Telephone Book.
Used to set up outgoing mode when
using the Telephone Book.
Trunk outgoing mode follows
Program 14-06 setting.
Assigned Data
1
0 = Not set
6 = PGD(2)-U( ) ADP
(Paging)
7 = PGD(2)-U( ) ADP
(Tone Ringer)
8 = PGD(2)-U( ) ADP
(Door Box)
9 = PGD(2)-U( ) ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
0 = Not Set
6 = PGD(2)-U( ) ADP
(Ext. Speaker)
7 = PGD(2)-U( ) ADP
(Paging/Tone Ringer =
1~8)
8 = PGD(2)-U( ) ADP
(for Door Box = 1~8)
(ACI) = (1~96)
9 = PGD(2)-U( ) ADP
12 = APR (for B2 Mode)
(193~512)
(default = 0)
(max. 24 digits)
,
#
1~9, 0, ,
Pause (Press line key
1),
Recall/Flash (Press line
key 2)
@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(default not assigned)
Maximum 12
Characters (Use dial
pad to enter name)
(default not assigned)
1~20
(default = 1)
Up to six characters
(default not assigned)
Up to 12 characters
1 = Group 01
2 = Group 02
3 = Group 03
:
:
:
20 = Group 20
(default not assigned)
0 = Trunk Outgoing
1 = Intercom Outgoing
(default = 0)
Issue 1.0
Level
2 3
2 - 1047