NEC Univerge SV8100 Features And Specifications Manual page 1261

UNIVERGE SV8100
Program
Program Name
Number
47-06-08 Group Subscriber Mailbox Options
– Forced Unscreened Transfer
47-06-09 Group Subscriber Mailbox Options
– Auto Time Stamp
47-06-10 Group Subscriber Mailbox Options
– System Administrator
47-06-11 Group Subscriber Mailbox Options
– Dialing Option
47-06-12 Group Subscriber Mailbox Options
– Next Call Routing Mailbox
47-06-13 Group Subscriber Mailbox Options
– Directory List
SV8100 Features and Specifications Manual
Description/Comments
Use this option to Enable or Disable
Automated Attendant Forced
Unscreened Transfer for the
Subscriber Mailbox. If enabled, each
Screened Transfer (TRF) to the
extension is converted to an
Unscreened Transfer (UTRF). If
disabled, Screened Transfers from
the Automated Attendant occur
normally.
Use this option to Enable or Disable
Auto Time Stamp for the Subscriber
Mailbox. If enabled, after the
subscriber listens to a message
VM8000 InMail announces the time
and date the message was left. Auto
Time Stamp also announces the
message sender (if known).
A subscriber can also enable Auto
Time Stamp from their mailbox.
Use this option to designate the
Subscriber Mailbox as a System
Administrator. This allows the
subscriber to use the options after
logging onto their mailbox.
Dialing Option provides additional
dialing options for Next Call Routing
Mailbox calls (see Next Call Routing
Mailbox below). If enabled, a caller
who accesses the Subscriber
Mailbox to leave a message can dial
any option in the Next Call Routing
Mailbox Dial Action Table. If
disabled, the caller can dial only 0
(to use the Next Call Routing
Mailbox 0 action).
Use this option to assign a Next Call
Routing Mailbox to the Subscriber
Mailbox. This provides callers with
additional dialing options while
listening to a Subscriber Mailbox
recorded or default greeting. The
digits the caller can dial depends on
the setting of the Next Call Routing
Mailbox and Alternate Next Call
Routing Mailbox options.
Use to set up a Master Mailbox
assigned as a Subscriber Mailbox in
47-03-03
Assigned Data
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
Call Routing Mailbox
Number (1~3 digits)
No entry (entered by
pressing CLEAR)
(default = 1)
(Call Routing Mailbox 01)
By default, Call Routing
Mailbox numbers are
01=16
0 = None
1~8 = List Number
= All
(default = 0)
Issue 1.0
Level
1 2 3
2 - 1237