Ip Trunk - (Sip) Session Initiation Protocol - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

IP Trunk – (SIP) Session Initiation Protocol

The UNIVERGE SV8100 IP Trunk SIP package sends the real time voice over the corporate LAN or

WAN. The voice from the telephone is digitized and then put into frames to be sent over a network using

Internet protocol.

Using VoIP equipment at a gateway (a network point that acts as an entrance to another network), the

packetized voice transmissions from users in the company are received and routed to other parts of the

company intranet (local area or wide area network) or they can be sent over the Internet using CO lines to

another gateway.

The PZ-32IPLA / PZ-64IPLA / PZ-128IPLA is

operate in the following modes:

Depending on the requirements and resource allocation in the LAN/WAN/Internet, the

be configured to use any of the following voice compressions:

G.711 Mu Law – Highest Bandwidth

G.729 (a) – Most often used

The LAN/WAN or Internet connection is provided by a 10 Base-T/100 Base-TX Ethernet.

Default Setting

SV8100 Features and Specifications Manual

interface that can provide IP trunks and Tie Lines. It can

Show Quick Links

Table of Contents