NEC Univerge SV8100 Features And Specifications Manual page 838

Issue 1.0
If an internal paging group has only IP Multiline Stations, mutlicast is used for the page. IP
Multiline terminals must have a gateway programmed to accomplish a multicast
transmission. When an actual gateway device does not exist on the network, a dummy
gateway address on the same subnet must be defined. If the paging group has any TDM
stations or an external speaker, multicast is not used and the gateway is not required.
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Single Line Telephones
Required Component(s)
None
Related Features
Meet Me Paging
Meet Me Paging Transfer
Paging, External
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
2 - 814
UNIVERGE SV8100
Paging, Internal