NEC Univerge SV8100 Features And Specifications Manual page 1253

UNIVERGE SV8100
Program
Program Name
Number
47-01-08 VM8000 InMail System Options –
Delay in Dialing Digital Pager
Callback Number
47-01-09 VM8000 InMail System Options –
Wait Between Digital Pager Callout
Attempts
47-01-10 VM8000 InMail System Options –
Wait Between Non-Pager Callout
Attempts
SV8100 Features and Specifications Manual
Description/Comments
Use this option to set the delay
(0~99 seconds) that occurs just
before VM8000 InMail dials the
Digital Pager Callback Number
portion of the Message Notification
callout number for a digital pager.
Set this delay so the pager service
has enough time to connect to the
digital pager before sending the
callback number. Your pager service
may be able to help you determine
the best value for this option (0~99
seconds). When placing a digital
pager notification, the system:
Seizes the trunk specified.
Dials the user-entered notification
number (in Message + OP + N).
Waits the 47-01-08: Delay in
Dialing
Digital Pager Callback Number
interval. Dials the number entered in
47-01-07: Digital Pager Callback
Number. The system assumes that
the notification number completes
dialing approximately four seconds
after trunk seizure. This means that,
by default, the Digital Pager
Callback Number is dialed into the
pager service about 13 seconds
after trunk seizure.
Use this option to set the minimum
time (1~255 minutes) between
unacknowledged or unanswered
digital pager Message Notification
callouts. (A subscriber
acknowledges a digital pager
notification by logging onto their
mailbox.)
After this interval expires, VM8000
InMail tries the callout again (for up
to the number of times set in 47-01-
14: Number of Callout Attempts).
If the system dials the callout
number and the pager service is
busy, it retries the number in one
minute.
Use this option to set the minimum
time (1~255 minutes) between non-
pager Message Notification callouts
in which the destination answers,
says Hello, dials 1 to acknowledge
and then enters the wrong security
code.
Assigned Data
0~99 (seconds)
(default = 9)
1~255 (minutes)
(default = 15)
1~255 (minutes)
(default = 20)
Issue 1.0
Level
1 2 3
2 - 1229