Univerge Multimedia Conference Bridge - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

UNIVERGE Multimedia Conference Bridge

Multiline Conference Bridge allows any intercom or outside caller to call the CD-PVAA blade to place a

multiparty conference call. Each CD-PVAA blade supports one 8-party conference or two 4-party

conferences regulated by a switch setting. Two CD-PVAA blades may be installed. DSP-based

amplification provides a higher quality conference call.

The CD-PVAA blade can be used with any version of software on the UNIVERGE SV8100

When the CD-PVAA blade is set for two, four-party conferences, ports 1~4 can be set to the

same Master Hunt Group, and ports 5~8 can be set to a different Master Hunt Group using

Program 11-07-01 (Department Group Pilot Numbers) and Program 16-02-01 (Department

Group Assignment for Extensions). This allows two different Pilot Numbers for each

If only one Pilot number is needed, put all eight ports in one hunt group using Program

16-02-01 (Department Group Assignment for Extensions). When the password is entered,

the conference selected is the conference you enter.

The supervisor must perform the Setting Procedures before the Conference Bridge can be

Up to 16 Voice Mail ports are available. The CD-PVAA blade reduces this number by eight or

16 depending on license.

Each CD-PVAA blade reduces the number of stations by eight or 16 depending on license.

Default Setting

System Availability

All Multiline Terminals

Required Component(s)

SV8100 Features and Specifications Manual

Show Quick Links

Table of Contents