NEC Univerge SV8100 Features And Specifications Manual page 1160

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-04 Service Code Setup (for Service
Access) – Set Camp-On
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
11-16-05 Single Digit Service Code Setup –
Camp-On
15-07-01 Programmable Function Keys
20-01-08 System Options – Trunk Queuing
Callback Time
20-01-09 System Options – Callback/Trunk
Queuing Cancel Time
20-06-01 Class of Service for Extensions
20-11-07 Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
20-29-01 Timer Class for Extensions
2 - 1136
Description/Comments
Customize the Service Code, which
is to be used for setting Camp-On.
Customize the Service Code, which
is to be used for cancelling Camp-
On.
Customize the 1-digit Service
Code used for setting Camp-On.
Assign a function key for Trunk
Queuing and Trunk Camp-On
(code 35).
Set the Trunk Queuing Callback
Time. Trunk Queuing Callback
rings an extension for this interval.
Set the Callback/Trunk Queuing
Cancel Time. The system cancels
an extension Callback or Trunk
Queuing request after this interval.
Assign a Class of Service (1~15) to
an extension.
Turns Off or On an extension ability
to use Transfer Without Holding.
Assign the timer class (0~15) to
each extension for each Night
mode. This entry includes virtual
extension number.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 750)
MLT, SLT
(default = 770)
#
(default = )
Trunk Groups: 1~100
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
0~64800 (seconds)
(default = 15 seconds)
0~64800 (seconds)
(default = 64800
seconds)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~15
0 = Not assigned
(default = 0)
Trunk Queuing/Camp-On
Level
1 2 3