NEC Univerge SV8100 Features And Specifications Manual page 992

Issue 1.0
Program
Program Name
Number
80-04-06 Call Progress Tone Detector Setup
– ON minimum time
80-04-07 Call Progress Tone Detector Setup
– ON maximum time
80-04-08 Call Progress Tone Detector Setup
– OFF minimum time
80-04-09 Call Progress Tone Detector Setup
– OFF maximum time
Operation
To store an Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 753 (for system) or 754 (for group).
3. Dial system or group storage code.
Initially, there are 1000 System Speed Dialing codes. There are Group Speed Dialing codes only if you define them
in programming.
4. Dial telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and . To enter a pause, press Transfer. To store a Flash, press Recall.
Enter @ for await answer before sending following digits on ISDN.
5. Press Hold.
6. Enter the name associated with the Speed Dialing number.
2 - 968
Description/Comments
Use to define the on minimum time
for the Call Progress Tone Detector.
Use to define the on maximum time
for the Call Progress Tone Detector.
Use to define the off minimum time
for the Call Progress Tone Detector.
Use to define the off maximum time
for the Call Progress Tone Detector.
UNIVERGE SV8100
Assigned Data
1~255 (30+30-7680ms)
default:
Type 1 (DT) – 9 (300ms)
Type 2 (BT) – 9 (300ms)
Type 3 (RBT) – 25
(780ms)
Type 4, Type 5 – 0
0~255 (30+30-7680ms)
default:
Type 1 (DT) – 0
Type 2 (BT) – 14
(450ms) [ET]
Type 3 (RBT) – 40
1230ms)
Type 4, Type 5 – 0
1~255 (30+30-7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 9 (300ms)
Type 3 (RBT) – 83
(2520ms)
Type 4, Type 5 – 0
0~255 (30+30-7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 14
(450ms)
Type 3 (RBT) – 115
(3480ms)
Type 4, Type 5 – 0
Speed Dial – System/Group/Station
Level
1 2 3