NEC Univerge SV8100 Features And Specifications Manual page 769

UNIVERGE SV8100
To activate or cancel Call Forwarding to/from the Mobile Extension:
1. When activating Call Forwarding From the Mobile Extension:
Dial the DID or DIL telephone number for the Mobile Extension.
If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and 15-
22), internal dial tone is heard by the Mobile Extension user.
-OR-
When activating Call Forwarding to the Mobile Extension:
Press CALL key or lift the handset.
2. Dial the service code defined in Program 11-11-06.
3. Dial Call Forwarding condition:
1 = Personal Answering Machine Emulation (then skip to step 5).
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate with simultaneous ringing (not for Voice Mail)
0 = Cancel
4. Dial destination extension or Voice Mail master number.
5. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
When you enable Call Forwarding, stutter dial tone is heard on the ICM dial tone of the Mobile
extension or, on a keyset DND flashes slowly.
To activate Call Forward Follow Me:
1. When activating Call Forwarding From the Mobile Extension:
Dial the DID or DIL telephone number for the Mobile Extension.
If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and 15-
22), internal dial tone is heard by the Mobile Extension user.
-OR-
When activating Call Forwarding to the Mobile Extension:
Press SPK or lift the handset.
2. Dial the service code defined in Program 11-11-07.
3. Dial 3 + Dial your own extension number (i.e., the source).
4. Dial Call Forwarding Type:
2 = All Calls
3 = Outside calls only
4 = Intercom calls only
5. Hang up.
SV8100 Features and Specifications Manual
Issue 1.0
2 - 745