Distinctive Ringing, Tones And Flash Patterns; Table 2-9 Distinctive Ringing: Tones And Flash Patterns - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100

Distinctive Ringing, Tones and Flash Patterns

Description
Distinctive Ringing, Tones and Flash Patterns provide extension users with audible and visual call status
signals. This lets users tell the type of calls by listening to the ringing/tones and watching the keys. It also
helps users monitor the progress of their calls. In addition, Distinctive Ringing lets multiline terminal users
customize their Intercom and trunk call ringing. This is helpful for users that work together closely. For
example, if several co-workers set their multiline terminals to ring at different pitches, each co-worker can
always tell which calls are for them. You can also customize the tones the system uses for splash tone,
confirmation tone, trunk ring tone, Intercom ring tone and Alarm ring tone. Refer to the chart below and
the UNIVERGE SV8100 Programming Manual for more details
Program
80-01-01~04 Service Tone Setup
30-05-02~21 DSS Console Lamp Table
Conditions
Single line telephone users cannot listen to or hear the pitch of the telephone incoming ring.
If Program 22-03-01 is set to 0~3 and Program 15-02-02 is set to 1~3, trunk calls follow the
ring pattern in Program 22-03-01 and the pitch in Program 15-02-02.
If Program 22-03-01 is set to 4~8 and Program 15-02-02 is set to 1~3, trunk calls follow the
ring pattern in Program 22-03-01.
If Program 22-03-01 is set to 0~8 and Program 15-02-02 is set to 4~8, trunk calls follow the
ring pattern in Program 15-02-02.
If Program 15-08 : Incoming Virtual Extension Ring Tone Setup is set to Incoming Ring Tone
Extension, then Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup must
have one of the priorities set to Incoming Ring Tone Extension.
The following voice mail features require system tones be changed in Program 80-01-02 to
work. Refer to the Programming section of the VM8000 InMail feature for details.
Call Holding
Busy Greeting
Call Screening
Await Answer Transfer
When a ring group call rings a Single Line Station, the BLF indication shows busy.
The priority of the Large LED is as follows:
SV8100 Features and Specifications Manual

Table 2-9 Distinctive Ringing: Tones and Flash Patterns

Set the frequency of the system splash tone. This is the tone the
system uses, for example, to alert the user of an incoming
voice-announced Intercom call.
Set the DSS and Hotline key flash rates for busy, idle, DND, ACD Agent
status, and hotel options.
.
Description
Issue 1.0
2 - 425