NEC Univerge SV8100 Features And Specifications Manual page 604

Issue 1.0
Related Features
Central Office Calls, Placing
Class of Service
Dialing Number Preview
Hotline
Intercom
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot Key
Pad
2 - 580
Description/Comments
Assign a Class of Service to
extensions (1~15). Any Class of
Service assignments you change
using Service Code 677
automatically update this program.
Turns On (1) or Off (0) the ability of
an extension to make a call by just
dialing the number without first
going off-hook.
UNIVERGE SV8100
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension
ports = Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
Hot Key-Pad
Level
2 3