NEC Univerge SV8100 Features And Specifications Manual page 616

Issue 1.0
Program
Program Name
Number
42-01-04 System Options for Hotel/Motel –
Setup Message Mode for Wake
Up Call (Hotel Mode)
42-01-05 System Options for Hotel/Motel –
Wake Up Call Message
Assignment
42-02-01 Hotel/Motel Telephone Setup –
Hotel Mode
42-02-02 Hotel/Motel Telephone Setup –
Toll Restriction Class When
Check In
42-03-01 Class of Service Options (Hotel/
Motel) – Check-In Operation
42-03-02 Class of Service Options (Hotel/
Motel) – Check-Out Operation
42-03-03 Class of Service Options (Hotel/
Motel) – Room Status Output
42-03-04 Class of Service Options (Hotel/
Motel) – DND Setting for Other
Extension
42-03-05 Class of Service Options (Hotel/
Motel) – Wake up Call Setting for
Other Extension
42-03-06 Class of Service Options (Hotel/
Motel) – Room Status Change for
Other Extension
2 - 592
Description/Comments
Use to assign the setup message
mode for wake up call (hotel mode)
options for Hotel/Motel Service.
Use to assign the wake up call
message assignment options for
Hotel/Motel Service.
If you want an extension to operate
in the Hotel/Motel mode, enter 1. If
you want the telephone to operate
in the business mode, enter 0.
Assign an extension Toll Restriction
Class when it is checked in. The
system has 15 Toll Restriction
Classes (1~15). The entry you
make in this option affects the
telephone in all Night Service
modes. (Refer to Programs 21-05
and 21-06 to set up the Toll
Restriction dialing options.) When
the extension is checked out, it
uses the Toll Restriction Class set
in Program 21-04.
Use to set the Hotel/Motel check-in
operation Class of Service (COS)
options.
Use to set the Hotel/Motel
check-out operation Class of
Service (COS) options.
Use to set the Hotel/Motel room
status output Class of Service
(COS) options.
Use to set the Hotel/Motel DND
setting for other extension Class of
Service (COS) options.
Use to set the Hotel/Motel wake up
call setting for other extension
Class of Service (COS) options.
Use to set the Hotel/Motel room
status change for other extension
Class of Service (COS) options.
UNIVERGE SV8100
Assigned Data
1
0 = Only Confirmation
Tone
1 = VRS Message
2 = Time Information
and VRS
(default = 0)
0~100
(0 = No Setting)
(default = 0)
0 = Normal
1 = Hotel
(default = 0)
1~15
(default = 1)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Hotel/Motel
Level
2 3