NEC Univerge SV8100 Features And Specifications Manual page 1009

UNIVERGE SV8100
Program
Program Name
Number
20-07-19 Class of Service Options
(Administrator Level) – SMDR
Printout Department Group (STG)
Data
20-13-20 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Account
Code Data
20-13-36 Class of Service Options
(Supplementary Service) – Call
Duration Timer Display
35-01-01 SMDR Options – Output Port Type This option specifies the type of
35-01-03 SMDR Options – Header
Language
35-01-04 SMDR Options – Omit Digits
35-01-05 SMDR Options – Minimum Digits
35-01-06 SMDR Options – Minimum Call
Duration
35-01-07 SMDR Options – Minimum Ring
Time (For Incoming Calls)
35-01-08 SMDR Options – Format Selection
SV8100 Features and Specifications Manual
Description/Comments
Used to determine if Department
Group (STG) Data is included in the
SMDR report for each COS.
Used to determine if Accumulated
Account Code Data is included in
the SMDR report for each COS.
In an extension Class of Service,
turns On (1) or Off (0) a Call Timer
for the extension.
connection used for SMDR. The
baud rate for the COM port should
be set in Program 15-02-19.
Specify the language in which the
SMDR header should be printed.
Enter the number of digits (1~24)
you want SMDR to block (i.e., X
out). Enter 0 not to block any digits.
Enter the minimum number of digits
a user must dial (1~24) before the
system includes a call on the SMDR
report. Enter 0 to include all
outgoing calls, regardless of the
number of digits dialed.
Enter the minimum duration of a call
that prints on the SMDR report.
Enter 0 to have calls of any duration
print.
Enter how long an unanswered call
must ring (1~65535 seconds) before
SMDR logs it as No Answer). Enter
0 to allow all No Answer calls to
print.
Do not change:
This option is added to allow an
increased account code field from
eight to 16 when used in the U.K.
This allows 16 characters of the
Caller ID name to be displayed. For
the AUS/NZ, this option is set to 0
and should remain at this setting as
16 characters are already provided
for the account code field.
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 1 for COS
01~15)
0 = None
3 = LAN
4 = CTA/CTU
(default = 0)
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
(default = 0)
0~24
(0 = Not applied)
(default = 0)
0~24
(0 = Not applied)
(default = 0)
0~65535 (sec)
(0 = All)
(default = 0)
0~65535 (sec)
(0 = All)
(default = 0)
0 = NA Type (North
America)
1 = G/J Type (Overseas/
Japan)
(default = 0)
Issue 1.0
Level
1 2 3
2 - 985