Tandem Ringing - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
Tandem Ringing allows an extension user to have two telephones with one telephone number. For
example, extension 105 (the master telephone) sets Tandem Ringing with extension 106. When extension
105 receives an incoming call, both extensions 105 and 106 ring. Callers would dial the master extension
number (extension 105 in this example). When either the master telephone or slave telephone is in use,
the other telephone cannot be used for outgoing calls or incoming calls.
The multiline terminal must be paired with either a single line telephone or a Wireless DECT (SIP)
handset. It cannot be paired with another multiline terminal.
A single line telephone must be paired with another single line telephone or a Wireless DECT (SIP)
handset. It cannot be paired with a multiline telephone.
Conditions
The slave telephone cannot call the master telephone.
Extension numbers up to eight digits can be registered on the Tandem Ringing key.
Extension numbers over nine digits cannot be registered.
If Tandem Ringing is enabled, and one of the extensions is busy, no additional calls can be
received or placed from either telephone.
Tandem Ringing can support up to 128 pairs of Tandem Ringing extensions.
The extension user which enables Tandem Ringing is the master, while the slave telephone
is the extension entered by the user while setting up the feature.
A slave telephone ignores the settings for DND and follows the master telephone settings
instead.
Voice Call is not supported on a multiline terminal with Tandem Ringing.
Calls placed on Hold while Tandem Ringing is active, immediately recall if the handset is
placed On-hook.
When an extension leaves a Message Waiting for a Tandem Ringing extension, both
extensions indicate the message until one of the extensions returns the call.
A slave telephone ignores the settings for Ring Groups and follows the master telephone
settings instead.
To transfer calls between the two Tandem Ringing stations, a System Park Orbit should be
used.
Default Setting
Disabled
SV8100 Features and Specifications Manual

Tandem Ringing

Issue 1.0
2 - 1079