NEC Univerge SV8100 Features And Specifications Manual page 825

UNIVERGE SV8100
Program
Program Name
Number
15-03-06 Single Line Telephone Basic
Data Setup – Extension Polarity
Reverse
15-03-07 Single Line Telephone Basic
Data Setup – Enabled On-Hook
When Holding (SLT)
15-03-08 Single Line Telephone Basic
Data Setup – Answer On-Hook
when Holding (SLT)
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
15-03-10 Single Line Telephone Basic
Data Setup – Caller ID Name
15-03-11 Single Line Telephone Basic
Data Setup – Caller ID Type
15-03-14 Single Line Telephone Basic
Data Setup – Forwarded Caller ID
Display Mode
20-03-01 System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
20-03-02 System Options for Single Line
Telephones – Ignore Received
DP Dial on DTMF SLT Port
SV8100 Features and Specifications Manual
Description/Comments
-- Not Used in U.S. -- Do Not
Change Default Entry as DTMF
issues may arise with voice mail.
Used to Enable or Disable Enabled
On-Hook When Holding for SLT.
Used to Enable or Disable Answer
On-Hook when Holding for SLT.
Enable (1) or disable (0) the Caller
ID FSK signal for an external Caller
ID module or a 3rd party vendor
telephone with Caller ID display.
Important:
If voice mail is used, this setting
must be disabled for the system
integration codes to be correct.
With a 2500 set (no Caller ID)
installed, this must be set to 0
for incoming callers to have a
talk path.
Determine if an extension user
telephone should display the Caller
ID name.
Determine whether the Caller ID
type is FSK or DTMF.
Determine what the display shows
when a multiline terminal receives
a forwarded outside call.
For a busy single line (500/2500
type) telephone, set the mode used
to answer a camped-on trunk call.
For ESL sets, enabling this option
(1) allows the user to dial Service
Code for Voice Mail Conversation
Record.
Use this option to define whether
the system should receive dial
pulse and DTMF signals (0) or
ignore dial pulse and only accept
DTMF signals (1).
Assigned Data
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = No
1 = Yes
(default = 1)
0 = Disable
(No)
1 = Yes
(Enable)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
0 = Calling Extension
Number (Calling)
1 = External Caller ID
(Forward)
(default = 0)
0 = Hookflash (Hooking)
1 = Hookflash + Service
Code 654
(default = 0)
0 = Do Not Ignore (No)
1 = Ignore (Yes)
(default = 0)
Issue 1.0
Level
1 2 3
2 - 801